Microscopic image analysis system 8CA-M Specific information:
A, use
The microscope image is by conventional microscopic imaging, high resolution CCD The camera displayed on the video monitor amplification, easy to observe and study; you can also use a digital camera. Digital photography image. Then by computer image processing, editing, storage and output (such as print) or into the multimedia system and electronic mail. Selection of microscopic image analysis system for further image processing and analysis, which is related with image morphology detection and analysis, statistics, such as: cell morphology; content of oil, water and blood; micro particles, and various geometrical line detection, analysis and statistics ... That can be done.?
Two, specifications and technical parameters?
One Three: the eye lens barrel hinge.? 360 degrees Orientation angle 30 degrees?? Interpupillary and diopter adjustable
Two Total magnification: 40 x ~ 1600 x (visual);? 120 x ~ 3000 x (image)
Three Mechanical tube length: One hundred and sixty Mm
Four Working table: 160 x 140 Mm?? Moving range: Horizontal? Seventy-six Mm vertical? Fifty Mm tour grid value: Zero point one Mm
Five Focusing mechanism:?? Coaxial coarse and fine adjustment range focusing position limiting device: Thirty-five Mm fine lattice value: Zero point zero zero two Mm
Six Abbe condenser: numerical aperture. NA1.25? With iris diaphragm and filter * * lifting structure adjustment range: Forty Mm
Seven Lighting system:?? Brightness transmission illumination system with variable light rail can be adjusted continuously?? Halogen lamp: 20W/6V
Eight The power supply: 110V or 220V 50Hz
Nine ., and eyepiece magnification: (table image system: total magnification conditions: "1/3 CCD 14" Display)
|
Flat field eyepiece
|
Achromatic lens
|
system
|
The diameter of the FOV
(mm)
|
Working distance
(mm)
|
total magnification
|
|
Magnification /? The diameter of the FOV ( Mm )
|
Magnification
|
numerical aperture
|
Microscope
|
Image system
|
|
10 x /18
?
16 x /13
|
4 x
|
Zero point one zero
|
dry
|
Four point five
|
Thirty-seven point five
|
40 x /64 x
|
X = 120
|
|
10 x
|
Zero point two five
|
One point eight
|
Seven point three one
|
100 x /160 x
|
X = 300
|
|
40 x
|
Zero point six five
|
Zero point four five
|
Zero point six three
|
400 x /640 x
|
X = 1200
|
|
100 x
|
One point two five
|
oil
|
Zero point one seven
|
Zero point one eight
|
1000 x /1600 x
|
X = 3000
|
?
system configuration
One Biological microscope: XSP-8CA
Two Image adaptor: MCL-Z
Three The image sensor camera:? TOTA-500
Four The image capture card: DH-CG400
Five The computer and printer:??? (own or purchase)
?
image processing system DH-CG400
* standard PAL , NTSC Color / monochrome video input.
* Input mode (software selection and switching): Six CVBS Three road input; Y/C Enter one of six analog video output.
* The highest resolution image: PAL : Seven hundred and sixty-eight * Five hundred and seventy-six * 24BIT ; NTSC : Six hundred and forty * Four hundred and eighty * 24BIT .
* Brightness, contrast, hue, color saturation adjustment software.
* According to a single field (odd field or even field), single frame, continuous field, continuous frame, interval of several field or a few frames etc..
* By filling out the shield ( MASK ) template, input image can be real-time display and storage of arbitrary shape.
* The hardware of the input image (zoom ratio SCALE Cut () CLIP ) and color space transform? (COLOR SPACE CONVERTION) Therefore, the input image size and position can be set flexibly, and can support YUV422 , RGB32 , RGB24 , RGB15 , RGB16 , Y8 A variety of image formats to display and storage.
* Display the collected images on the computer, image and graphics on screen display mode.
* The video signal can be stably received recording camera.
* The encryption function protection word user software from piracy.
* Support the same host into pieces DH-CG400 The image acquisition card and work.
?
Microscopic image analysis software system MiFas
MiFas Image processing and analysis function, covering almost all the applications of quantitative image analysis, including materials, metallurgy, medicine, chemical, biological, tribology and so on, all need statistical and morphological images using means of automatic analysis, determination of the field. Usually associated with various morphological image detection and analysis: such as tissue cell morphology analysis, metallographic microstructure and grain size analysis, analysis of powder and micro particles, surface defect analysis of paint, analysis of the content of pollutants in oil, analysis of agricultural seed morphology, various micro shaped geometry measurement, all kinds of reactant particles in the chemical industry form can use the analysis. MiFas To complete. The system has the following processing and analysis function:
???? Geometric inspection: straight line, curve, circle, ellipse, rectangle, arbitrary length, angle, area, perimeter and the straight line position measurement, straight line and straight line, straight line and arc, arc and arc geometry parameters measurement. The measuring unit optional: micron, mm, cm, decimeter and inches;
???? Image distortion and geometric correction: horizontal mirror, vertical mirror, pan, tilt, zoom, rotation, perspective, roaming, arbitrary, mesh deformation;
???? Regional selection tool: wand, oval, rectangular, circular, lasso tool, square tool;
???? Regional treatment: regional selection and regional expansion, narrowing, boundary smooth, translation, zoom, rotation, arbitrary deformation;
???? Image processing: hue, adding a strong, edge detection, image smoothing, image gray value morphology, constant operation, image operation, other filters;
???? Analysis of treatment: analysis of target analysis to expand, shrink, and smooth boundary analysis of target hole filling, delete, and contour extraction, morphological gradient, skeleton, skeleton purification, branch pruning, breakpoint repair etc.;
???? Analysis of parameters: geometric parameters, equivalent position parameters, geometric parameters, external geometric parameters, optical density parameters, morphological parameters, moment parameters, hole parameters and other parameters, such as the individual parameters One hundred A number of statistical parameters One hundred A number of the total number of parameters analysis Ten thousand A number of;
???? Parameter analysis of visual processing: analysis and image between direct allusion display, specific target and its long axis, centroid, rectangle, convex hull, number of extraction, analysis of different target transparency color laminated display;
???? Other function: the system also provides Straw, brushes, filling, line, mobile, tailoring, scale, measurement and other dozens of interactive processing tools, to complete the image deformation, filling scale, arrows, text, draw various graphics and text editing and output reports etc..
???? Complete software: image analysis computer operating system? MiFas? Software CD and dongle. (pay attention to the preservation and correct use)