Vacuum drying technology:
Vacuum environment greatly reduces the boiling point of the liquid need to be expelled, so vacuum drying can be easily applied to the heat sensitive material;
But it is not easy to dry samples, such as powder or other granular samples, using vacuum drying method can effectively shorten the drying time;
Mechanical parts of various complex structures or other porous samples after cleaning using vacuum drying method, without leaving any residue completely dry;
The use of more security in vacuum or inert conditions, completely eliminate the possibility of explosion heat oxide;
Compared with the ordinary cycle depends on air dry, the powder samples are not flowing air blowing or moving.
Product features:
The shell is made of cold rolled steel plate, the surface electrostatic spray tank made of stainless steel material, semi circular four angle design is easy to clean;
Temperature control system adopts microcomputer chip technology, LCD screen display various parameters, the temperature controller has temperature control, timing, alarm function;
The box door tightness can be adjusted by a user, silicone rubber door seals the overall shape, to ensure the high vacuum box;
The studio is a rectangular structure, the effective volume of the maximum, the door is made of toughened hulletproof double glass door, and make the training items to make the user at a glance on the studio;
Is caused by parameter memory state data and save the lost due to power outages, crash, recovery of function calls.
Optional: printer, GPRS (support curve print) SMS alarm, computer monitor three.
Technical parameters:
Model: BZF-30
Supply voltage: 220V + 10V ~ 50/60HZ
Input power: 900W
The temperature range of room temperature to 250 DEG C: +2
Temperature fluctuation: + 0.5 C
Reach the vacuum: 133Pa
Volume: 25L
The liner (mm):300 * 296 * 275
Size (mm) * 430 * 475:590
Carrying bracket: 2
Timing range: 0 to 99 hours and 60 minutes