|
Part Number: 97-718-009
|
|
Description: Dual Monitor & Handle Kit for Interactive Arm (black)
|
|
Includes bow, two mounting brackets, handle mounting, hardware
|
|
* Outside width of monitor should be 21 "to 24.5" (53 to 62 cm). This range accommodates 23 "and 24" displays as well as some displays with screens as small as 22 "or as large as 26 If the outside width is." less than 21 "(53 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5" (62 cm) are not compatible
|
|
Weight of displays can Combined be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution s weight capacity must be "reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5" (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5 "(64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity
|
|
Specially designed for use with Interactive Arms (45-296-026 or 45-304-026) but will also attach to other mounts with four-hole interface of 50 x 50 mm 100 x 100 mm or 200 x 100 mm
|
|
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
|
|
This kit can be installed and used without the included handle
|
|
Product Dimensions: 4.6 "H x 29.1" W x 1.5 "D (11.7 x 74 x 38 cm)
|
|
Shipping Dimensions: 31.5 "x 13.5" x 7 "(80 x 34 x 17.5 cm)
|
|
Shipping Weight: 9.2 lbs (4.2 kg)
|
|
Warranty: Five (5) years
|