Large tool microscope JX6 (JGX-2) Specific information :
A, use?
JX6 Large tool microscope is a precision optical measuring instrument based on the . A performance measurement instrument widely used in Metrology Department of large tool microscope for machine manufacturing factory, scientific research institutes and universities. For the determination of:
One Verification, model, model, model of milling cutter, die cutter and the shape of the cam.
Two The location and shape, contour screw thread measuring in diameter, diameter, diameter, pitch, spiral angle and spiral angle of screw shaft (tooth shaped round, flat rectangular plane, etc.).
Three Measurement of thread cutter, spiral shaped screw thread and thread milling cutter turning angle, various templet milling cutter and various shapes of the model contour angle.
Four And use optical localizer to measure the hole and groove width.
Five Use double image eyepiece to measure between the center distance between two holes and parts of the slit, or line with symmetrical graphics distance etc..
Six And use the circular contour eyepiece can conveniently and accurately measure R0.1~R100 The arc size.
Two, technical parameters
((1) measurement accuracy :????????测微鼓轮的精度： 0.01mm
In view of the Precision Goniometer eyepiece: 1. "
The eyepiece angle precision contour: 10. "
Round angle precision worktable : 3. "
Pole inclination precision ruler: 30"
((2) measuring range :???????? Longitudinal travel:
????? Application of micrometer screw: Zero -25mm
??? ? Application and micrometer screw gauge: Zero -150mm
??????? ? Transverse travel
?? Application of micrometer screw: Zero -25mm
??? ? Application and micrometer screw gauge: Zero -50mm
??????? ? The range of the indexing angle goniometer eyepiece: 0-360.
??????? ? Angle round table 360 degrees:
????????? Range profile eyepiece angle indexing: Plus or minus 7 degrees
??????? ? Microscope column lateral tilt range: = + 12 degrees
??????? ? Round table diameter : 280mm
??????? ? Microscope cantilever length: About 167mm
??????? ? The distance between the table and the maximum objective: 130mm
??????? ? The length of the workpiece allowed by the thimble rack:
??????? ? Not more than Phi 39 The work piece: the longest 315mm
??????? ? Not more than Phi 85 The work piece: the longest 235mm
??????? ? V The maximum diameter of stent type clamping workpiece: 130mm
(3) Magnification :
|
Zoom time
|
Total magnification
|
Working distance
|
The diameter of the FOV
|
|
1X
|
10X
|
About 79.2mm
|
About 22mm
|
|
3X
|
30X
|
About 69.3mm
|
About 6.6mm
|
|
5X
|
50X
|
About 50mm
|
About 4mm
|
(4) Size :??????? Wide: 600mm
Long: 900mm
High: 550mm
(5) weight :??????????? 90KG
(6) Instrument accessories :???????
|
Name
|
Number
|
Name
|
Number
|
|
The main body of the instrument
|
One platform
|
Lighting equipment for general use
|
One piece
|
|
Goniometer eyepiece
|
One set
|
Goniometer eyepiece lighting
|
One set
|
|
The thread profile eyepiece
|
One piece
|
Double image eyepiece
|
One piece
|
|
Optical locator
|
One set
|
1X Objective lense
|
One only
|
|
3X Objective lense
|
One only
|
5X Objective lense
|
One only
|
|
25mm Gauge block
|
Two block
|
50mm Gauge block
|
One block
|
|
75mm Gauge block
|
One block
|
Block.
|
piece
|
|
Reflection illumination
|
One set
|
Transformer
|
One only
|
|
Inner and outer thimble bracket
|
One set
|
V Support
|
One Yes
|
|
No center fixture
|
One piece
|
The size of the splint
|
One set
|
|
Screwdriver
|
One set
|
Fixed focus bar
|
One piece
|
|
Glass table
|
One block
|
Small frosted bulb
|
Ten only
|
|
Packing list
|
One share
|
Product specification
|
One share
|
|
Certificate
|
One share
|
|
|
(7) Optional : 1. Objective lense : 1.5X